Burlington Birkenhead Traditional Basin Mixer Tap with Plug and Chain Waste – BI5 | Classic Bathroom Tap

Burlington Birkenhead Basin Mono Tap with Plug and Chain Waste BL5

This Burlington Birkenhead Basin Mono Tap with Plug and Chain Waste is an excellent choice for bringing a bit of class to your bathroom and are made from Brass Ingots with Chrome plating. 

This tap comes in two variants, the standard and the Regent. The Regent tap spouts are 3cm higher up. This can be selected from the Drop down box above. 

• Finish: Chrome
• Brass Construction
• Product Code: BI5

About Burlington Taps.

Burlington Regent taps are 3cm higher than standard taps This is achieved by using tap spacers on the base of the taps. By adding ‘Regent’ to the tap description you are specifying a tap that is 3cm higher.

All Burlington taps are manufactured from brass ingots and chrome plated to 0.3-0.4 micron

All Burlington tap indices, telephone handsets, diverters, bath pug indices and the overflow filler indices are made from ceramic – absolutely no plastic!

All Burlington taps come with a Neoperl flow straightener (for low water pressure) and a Neoperl aerator (for high water pressure) and a Neoperl key to swap the two items out

Benefits of Neoperl:

• the aerators are designed to limit the flow of water to a fixed rate – regardless of the incoming water pressure – so you have optimal performance from your tap, without wasting any water.
• aerators create the ‘champagne’ effect in the flow of the water
• flow straighteners make the flow of the water cleaner, so there is less splashing
• Burlington is the first traditional range that can be specified for all commercial & hotel contracts in the UK. Most larger contracts specify the exact flow rate required by each type of faucet in the building. For large projects we can provide the specific aerator for a specific commercial contract to create the exact flow rate required and we can also customise the indices as well.
• the aerators & flow straighteners have a serrated edge – so even if you lose our fitting key you can use the aerator / flow straightener that you want to fit into the tap as a key to unlock the existing aerator / flow straightener!

The Burlington bridge basin mixer enables you to have mixed hot and cold water, whilst retaining the traditional two tap hole configuration in the basin. It also has a swivel spout – you can swivel the spout and the water comes up vertically – so you have a water fountain (it also can make washing your hair in a basin easier!)

Burlington Taps are WRAS approved

Burlington Basin & bidet mixers are available with a high central Burlington ceramic indice or a low central Burlington ceramic indice. These two combinations are supplied in the same box – so the consumer can make their choice in their home at the point of installation.

Burlington products are covered by a comprehensive manufacturer warranty which varies across the available product types. This covers all Burlington products, so long as they’re installed and maintained according to the manufacturer guidelines provided.

You can extend the guarantee offered by Burlington on registering your guarantee using the link below;

Register Your Guarantee

Replaceable parts are available directly from Burlington Spares